High Temp Paint Spray can 350g

Product Details

Perfect for heat-exposed metal that’s rusting or needs a new coat. Restores that brand new, satin black finish to stoves, flues, and BBQs.

New Coat High Temp Spray Paint is a self-priming, silicone-based, low sheen and heat resistant paint that withstands continuous temperatures up to 500°C. It may be painted directly onto cast iron, steel, and stainless steel. It is suitable for painting pot-belly stoves, heaters, ovens, flues, barbecues, and exhaust manifolds.

Directions

PREPARATION: Clean the surface thoroughly. Remove all traces of grease, oil, dirt, and rust. Sand previously painted surfaces lightly. Wipe with mineral turps and allow to dry. APPLICATION: Choose a dry, well-ventilated area. Stir thoroughly. Apply in thin coats. Two coats are usually sufficient. Lightly sand between coats. Do not paint below 5°C or in high humidity. DRY TIME: Touch dry in 1-2 hours. Handle in 4-6 hours. Recoat after 16 hours. Longer drying time is needed in cold or damp/humid weather. Allow 24hrs between drying and curing. CURING: It is important that the article is cured to achieve hard-dry conditions. Ensure good ventilation. Raise the heat gradually. Fumes and smoke may be emitted during this time. When using the heater for the first time after painting, make a gentle fire for the first 30 minutes. CLEAN UP: Clean brushes and equipment with mineral turps after use. COVERAGE: 13-18m2 per liter

Note: Paint may be thinned with up to 10% mineral turpentine for brushing, or up to 25% for spraying. Contains: >20% MINERAL TURPENTINE